GSXS Motorcycle stands

GSXS Motorcycle Stands

GSXS Motorcycle Stands

When working on your GSXS Motorcycle stands are indispensable, there a variety of different stands,  from the most common Paddock stand that lifts the rear of the bike by sppols or bobbins attached to the swingarm, Front wheel clamps to hold the bike in place and upright, various stands to lift the front via the fork bottoms or the headstock and the Abba stands that lift the bike by the swingarm pivot

Abba Sky lift

For working on  a motorcycle there is nothing better than an Abba Sky lift, I use my sky lift primarily with my Suzuki GSXS1000F but I also use it with many other bikes

If you’re looking to raise your bike up high off the ground and make working on the floor a thing of the past, then look no further than the Sky Lift! This product will make even the most awkward & tricky jobs on your bike an absolute breeze.  The Sky Lift sets the standard in motorcycle lifts with its safety, versatility, maneuverability and above all usability.

 GSXS abba skylift

Adaptable to fit over 300 different models of motorcycle without the need for modification to your machine, including the Suzuki GSX-S family, lift your bike high off the ground at 3 different angles, maneuver your bike around freely using its four high quality casters and be able to do all this and more safely on your own then its easy to see why the abba Sky Lift is considered by many industry experts to be the new “benchmark” in motorcycle lifts!

The Sky Lift utilizes the same proven fitting kit system as the award winning abba superbike stand and therefor fittings can be shared between both products. With the Lifts built is CE approved hydraulic foot pump the Sky Lift will raise your bike to a very comfortable working height. With your bike lifted in any position the Sky Lifts high quality castors (which include brakes) mean you can effortlessly move your bike around or tuck the bike away in the garage.

 One Lift, three positions….

  • The Horizontal lifting position allows you to simply raise the bike with both wheels level like a traditional bench lift.
  • The Rear wheel high (stoppie position) is perfect for working on the rear end of the bike and allows access to area’s on your bike you would have struggled to get to before. This will raise the rear end of the bike higher off the ground than most workbench’s!
  • The Front wheel high ( wheelie position) will raise the bikes front wheel to around eye level taking the back ache out of front end maintenance and cleaning. This will raise the front end of the bike higher off the ground than most workbench’s!

The abba Sky Lift requires no modifications or parts to be permanently fitted to your bike whatsoever, your machine stays totally standard. The lift fits to the swing arm pivot of the motorcycle and connects at the rear of the swing arm via a support strap (depending on lifting position). Should you change your motorcycle its a simple case of upgrading your fitting kit for your new machine, fittings can be changed for different models in a matter of seconds and are relatively cheap to purchase.

With all these advantages and many more, not to mention our 20+ years of highly regarded backup and customer service its easy to see why the abba Sky Lift is the straight forward choice as the ultimate accessory for your motorcycle.

  • NEW – Now supplied with our 3rd generation hydraulic ram. The new internals of our latest ram, combined with the foot pedal operation mean the lifting speed is around 40% faster than shown in some of our original videos. It now only takes around 35 seconds to lift to max height!

 

Other GSXS Motorcycle stands

 

Front wheel clamp with Paddock stand
Front wheel clamp with Paddock stand

Paddock stand lifts the rear wheel via spools or bobbins (can also have flat plates that lift the swing arm directly) – Useful for removing rear wheel, lubricating/cleaning chain, rear brakes etc

Front Fork Stand

Front Fork Stand

Front Fork stand, useful for removing front wheel, brakes etc

Front Wheel Clamp
Front Wheel Clamp

Front wheel clamp, keeps bike upright and secure – useful for security and setting up suspension

GSXS Motorcycle stands